Electronic ballast Quicktronic Intelligent QTI DALI T5 2x21/39 DIM

Electronic ballasts with dimming function for T5 (16 mm) fluorescent lamps controlled by DALI signal QUICKTRONIC INTELLIGENT QTi DALI 2X21/39 DIM T5

Application area

• Intended for use in emergency lighting systems according to PN-EN 50172/DIN VDE 0108-100
• Installation in emergency lighting systems according to IEC 61347-2-3, Annex J
• Industry
• Large-area offices, corridors and warehouses
• Public buildings
• Sports halls and factories
• Light lines
• Shop lighting
• Intended for luminaires with protection class I

Product benefits

• System warranty available
• Easy integration in the luminaire thanks to the same dimensions as DALI GI ECG
• Touch DIM function for easy and cost-effective regulation of several ECGs
• Same luminous flux with direct and alternating current
• Luminous flux regulation of amalgam lamps without flickering or reduced service life
• Automatic restart after lamp replacement
• No new approval required

DALI product features

• Control via DALI interface
• DALI compliance with IEC 60929 and IEC 62386
• Control input protection against overvoltage and polarity reversal (OSRAM power electronics)

Touch DIM and Touch DIM sensor operation

• Manual control without controller and with standard connectors
• Integrated memory function (double click) and "soft start"

Product features

• Corridor lighting function for direct connection of the ECG with a conventional motion sensor
• Corridor lighting function with pre-programmable lighting
• TouchDIM function for freely setting light parameters and switching on at a time
• Suitable for SMART GRID for feedback on energy consumption and operating hours of the light sources
• Suitable for emergency function for automatic detection of emergency lighting by the ECG
• Very low power consumption in standby mode: < 0.2 W (A1 BAT)
• Lifespan: > 100,000 h (for T = 65 °C at T c )
• Very high number of switching cycles: up to 300,000
• Dimming range: 1…100 % (3…100 % for compact fluorescent lamps)
• POWER2LAMP function for optimum adjustment of the ECG power to the lamp during lamp operation
• Frequency: 0 Hz, 50…60 Hz, AC

Electrical data

• Input voltage, AC 198…264 V
• Rated voltage 220…240 V
• Mains frequency 50…60 Hz
• Input voltage, DC 154…276 V
• Operating frequency 44…120 kHz
• Max. number of ECs with 10 A fuse 8 (Type B)
• Max. number of ECs per 16 A circuit breaker 13 (Type B)
• Power loss in standby 0.2 W
• Inrush current 45 A

Light data

• Start-up time 0.6 s (Optimum preheating of electrodes, hot start)

Temperatures and operating conditions

• Ambient temperature range +10…+50 °C
• Relative humidity 5…85 %

Durability

• Durability SE 100000 h (At temperature tcase = 65°C at measuring point tc / 10% damage)

Dimensions and weight

• Length 423.0 mm
• Width 30.0 mm
• Height 21.0 mm
• Mounting hole distance, length 415.0 mm
• Product weight 370.00 g
• Cable length, input side 8.0…9.0 mm (Combi wiring)
• Cable length, output side 8.0…9.0 mm (Combi wiring)
• Cable cross-section, output side 0.5…1.5 / 0.5…1.0 mm2 (Stranded / Flexible)
• Cable cross-section, input side 0.5…1.5 / 0.5…1.0 mm2 (Stranded / Flexible)